IFR 艾法斯 相位噪声分析仪 NTS-1000B ｜DCR14000A 14GHZ

IFR 艾法斯 相位噪声分析仪 NTS-1000B ｜DCR14000A 14GHZ

RDL NTS-1000B Phase
Noise Analyzer
 
The NTS-1000B Phase Noise
Analyzer usesthe proven “delay-line
discriminator” measurementtechnique to accurately
measurePhase
Noise at offsets between 10 Hz and 1MHz. The NTS-1000B
performs a precise calibrationat the measured frequency
beforeevery
measurement to insure measurementaccuracy.
The RDL Model NTS-1000B
Phase NoiseAnalyzer is a unique
instrument that, forthe first time, allows
phase noise testing ofevery part. An FFT digital
** processorand vibration-hardened
delay line are containedinside the unit. No
external **generator or outside
computer arerequired.
Measurements are made by
simply pushingthe “start measurement”
button orsending an IEEE bus
command. No specialtraining or skills are
required tooperate the RDL Model
NTS-1000B.Phase locking is not
required. Automatic“pass/fail” analysis of
phase noise levelsand spurious levels is
provided. Theselevels are user defined
and the resultscan be reported over the
IEEE-488 bus.
 
The “measurement range”
and “number ofFFT averages” are
selectable by the user tooptimize measurement time.
The NTS-1000B
only measures in the selected rangeto minimize the
measurement time. Inproduction applications,
where extremelyfast measurements are
needed, theNTS-1000B can measure and
reportthe
results in less than 2 seconds.Typical measurement time
for afull
range measurement, 10 Hz to1 MHz, with 100 FFT
averages,is
only 30 seconds, including anautomatic
calibration.